The fascia is the board along the edge of the roof that the gutter is fixed to. On most older Melbourne homes it's timber. You don't notice it until it starts to rot, and by then it's often the reason the gutters are failing. Todd checks the fascia on every quote, so here's what he's looking for.
Signs the fascia is gone
- Soft or crumbling timber when you press it
- Paint peeling or flaking along the boards
- Gaps where the gutter has pulled away from the board
- Water stains on the eaves below
- Boards that have bowed or split at the joins
Why it matters for new gutters
A gutter is only as strong as what it's fixed to. Brackets screwed into rotten timber work loose, the gutter loses its fall and water starts pooling again. Putting new gutters on bad fascia means paying twice.
Your options
Keep it
If the timber is sound, it stays. Plenty of fascia only needs a paint, and the new gutter goes straight on.
Cover it
Sound timber can be wrapped in a Colorbond fascia cover. It gives you a no-paint finish that matches the gutters, and you never have to get the ladder out to repaint it.
Replace the rotten boards
Where only some boards are rotten, we replace those lengths and keep the rest.
Switch to a fascia gutter
A fascia gutter like Ace Nu Line does away with the timber altogether. It fixes straight to the rafters and does the job of both the fascia and the gutter. On houses where most of the fascia is gone, it's often the most cost-effective fix.
Doing it all in one visit
Fascia and gutters are usually best done together, with one crew and one colour. James wrote in his review that we replaced his "gutters downpipes and fascia covers. All done in less than a day." Bigger and two-storey jobs take longer, and Todd will tell you how long when he quotes.
Book a free quote and we'll check your fascia while we're there. More on fascia and downpipes.



